All right, some of you may have noticed the CPU errors we've been getting at MoGu--growing pains for a growing site! I have recoded the whole site to straight code instead of using the CMS I was using--not because it was a buggy CMS, but because I can't afford my own server, which is what the CMS deserved! Bottom line is you should notice a much quicker site, and no more errors! Thanks--stick around, we're growing like crazy!
Before you mod your Razr, you need to obtain a few
things. DON'T INSTALL ANYTHING YET. We will do that after. Here are the most common items you will
need:
Motorola Mini Data Cable.
A USB Cable to connect the phone to the PC. $12 at
Radio Shack.
They're even cheaper on eBay.
All you need is a 5 pin Mini-B to type A USB adapter.
NOTE: If you prefer the old method of Getting Connected, or if this one doesn't work for you, or if you plain old would rather follow a Flash animation instead of pictures only, then check out an alternative method which works just as well!
The hardware wizard will now look something like this. It will be helping you install one of the following: Motorola USB
Modem, Motorola Accessory, Data Logging MCU Interface, Test Command
Interface, or Motorola Flash Interface. Select "Install from a list or specific location" and select next.
You will advance to the next step. Check the "Include this location" box and hit browse.
Browse to the directory where you installed the UID, KDWP and JAL Enabler Tool for Motorola OS Products Version 2.0 and select the appropriate folder containing your drivers
(either the Winxp or Win2k folder). Select OK.
Now your screen will look something like the one below. Click next.
A new screen will pop up saying that your device is being installed
Before it is done installing you will have a pop up saying that the device you are installing is not windows certified. Click
"Continue Anyway."
The installation will resume.
When it is done you will see another screen click Finish.
DO NOT UNPLUG your phone at this point. Another install window will pop up for the next driver. You may have to unplug and plug back in the phone before it prompts you again to install more drivers. Follow the
same instructions. When you are done you should have installed five
drivers: Motorola USB Modem, Motorola Accessory, Data Logging MCU Interface, Test Command Interface, and Motorola
Flash Interface.
Congrats you have gotten your phone connected and can now start your modding with P2k programs!!!
Home.