All right, some of you may have noticed the CPU errors we've been getting at MoGu--growing pains for a growing site! I have recoded the whole site to straight code instead of using the CMS I was using--not because it was a buggy CMS, but because I can't afford my own server, which is what the CMS deserved! Bottom line is you should notice a much quicker site, and no more errors! Thanks--stick around, we're growing like crazy!
if it helps...
Unlocking- Try Before You Buy
You can test the unlocking software before you purchase! Simply follow the instructions
below to test the software and ensure that it is compatible with your
computer.
All unlock functions are disabled from the test login/password provided
below. you will need to purchase a valid login/password to use the software.
Remote USB Unlocking Instructions:
1) Download and Install Software
2) Install Drivers
3) Test Driver Installation
4) Unlock phone
While the instructions may seem long, the process is
very simple. The whole process should take no longer than 10 minutes
at the very most.
Step 1 - Download and Install Software
Use the link below to download the software. Use the
"Run" button to load the application immediately.
The auto-installer will guide you through the
install process.
Step 2 - Install Drivers
The instructions below
will guide you through the process of installing the drivers for
your phone. Although the process appears long on first inspection,
it shouldn't in fact take more than two minutes.
Before you can use any function of
the service, you must install all the Motorola drivers.
If you have PST, RSD Lite, or Motorola Mobile
Phone Tools installed on your computer (or you have already followed the Get Connected guide), you can skip this step and
move onto Step 3 as drivers should already be installed.
Plug your
USB data cable into your phone, switch the phone on. Windows should
find new hardware.
1. Windows
should now launch your wizard saying "Found New Hardware
- USB Device"
2. The "Found
New Hardware Wizard" is launched. Choose "Install from a
list or specific location (Advanced). Click "Next"
3.
Click "Include this location in the search" box. Click
the "Browse" button.
4. Browse to
your C: drive, and then to the "Program Files" folder.
Expand this folder by clicking on the plus sign, and
find the "MotoBlade" folder (i.e. C:\Program
Files\MotoBlade). Select this folder and press the
"OK" button.
5. Click
"Next"
6. You may or
may not get the next few messages. If you do not, then
you can skip the next few steps. If you do get the above
message, click "OK"
7. Click the
"Browse" button.
8. Once again
browse to the C:\Program Files\MotoBlade folder.
Double click on this folder
to open it.
9. Highlight
P2K.sys and click Open.
10. Click
"OK" if you receive any more such messages.
11. Click
"Finish" your done. NOTE: If
Windows detects your phone as a Motorola USB Modem that
is also OK.
After
doing the above, please reboot your computer, then plug the phone in
and switch on again. If Windows does not find any more drivers they
should be installed correctly. The next section will test the
installation of the software and the drivers.
Now run the Cell-Unlock.com
software. This can be found by going to Start Menu, then to the "All
Programs" menu, finding the newly-installed "MotoBlade"
folder and running the USB Unlock software.
The application should open looking like this:
Testing the software.
1. Open the
software and enter username "test" and password
"test" (without the quotation marks).
-The Name/Password info is case sensitive - make sure
you enter these exactly.
2. Press
connect. If you receive a notification from Windows
Firewall (or any other software firewall application),
click "unblock" to allow the software to connect to the
server. After a short delay, your computer should
connect to the unlock server.
3. Select
your phone model from the drop down box next to
'Motorola', and highlight "Info Read" from the box
below.
4. Connect
your phone and switch it on. Wait until your phone has
finished booting up.
5. Press
start.
6. If you
are presented with an error regarding "Motorola
Interface not found or Corrupted" then your computer
should ask you to install some new drivers. Go through
the same process as above to install any new drivers -
directing Windows to the "C:\Program Files\MotoBlade"
folder. The computer may detect multiple devices, so you
may need to do this multiple times. Make sure that the
computer has stopped detecting new devices before moving
to the next step.
7. Now press
OK on that error message and then wait for the software
to display all the information about your phone in the
left window.
8. If this
is done successfully, then the software is accessing
your phone correctly.
In order to complete the unlocking process, you will
need to purchase an unlocking credit from us.
9. For some
phone models there will also be a "Check Unlock
Possibility." Use this option to make sure that the
unlocking software is compatible with your phone's
firmware.
All Unlocking Functions are
disabled for Test mode. You will need to purchase a login/password in order
to gain access to unlocking functions.
Click here
to return to the sales page and
purchase your unlocking credit, or just click the Buy Now button below!
Start Unlocking Now!
Purchase
one Motorola cable unlock $25
£14
€20
Payments are processed securely through PayPal. We are a PayPal
Verified seller, so all transactions are safe and secure.
Purchase
one Motorola cable unlock
£14
€20
Home.