All right, some of you may have noticed the CPU errors we've been getting at MoGu--growing pains for a growing site! I have recoded the whole site to straight code instead of using the CMS I was using--not because it was a buggy CMS, but because I can't afford my own server, which is what the CMS deserved! Bottom line is you should notice a much quicker site, and no more errors! Thanks--stick around, we're growing like crazy!
if it helps...
SEEM Editing With p2kMan & 10's SEEM Changer.
by mikekay10
You
may often find you need to perform SEEM edits.
This guide will show you how to do this step by step.
Lets assume you want to change SMS storage from sim card to phone, from The SEEM Map you get: SEEM 0032_0001 offset
40 - bit 6: SMS storage (0 for phone, 1 for SIM)
1) Get the SEEM from the Phone. SEEM 0032_0001
means seem number 0032, record number 0001. So we need to get SEEM 0032 from the phone. Start P2kman, above the
Download Seem box enter 0032 in both the from and to box.
Hit the Download Seem box.
Choose a location to save in, leave the file name as xxxx_yyyy.seem. Hit save.
Make a copy of this file before proceeding to step 2 as
a backup in case you get it wrong or has an unexpected result.
2) Edit the Seem. Open 10's Seem
Changer program (Download the latest install program from: 10's SEEM Changer)
Hit Select file. Browse to the location you just
saved the SEEM to.
Click on the file with the correct Seem number (0032 in this case) at the start and the correct record number (here 0001) at the
end. Click on Open.
Enter the required offset in the offset box (in this case 40). You can hit
"read offset" if you want to see the existing value - but that isn't strictly necessary.
This time we are
editing a bit (bit 6) So choose bit 6 from the dropdown box. And we want to set it to 0 (for phone storage) so choose 0 from the
state box. Sometimes you will need to change a value rather than a bit - in that case you would enter a value in the value box
instead of choosing a bit and a state.
Hit the Set Bit button - or in the case of a value change
Set Value. Close the program
3) Put the modified SEEM on the Phone. Enter the Seem and record
number in the boxes above the Upload Seem button in p2kman
Hit the Upload
Seem button, browse to the modified file and hit open. When you see an ok message in the message area at the bottom of
p2kman, restart the phone.
Good Job!
*NOTE* You can also use the seem changer program for the gain_table.bin file. Use the Phone>>>PC button in place of
step 1. In step 2 when selecting the file use the drop down box to change the file type. In step 3 use the PC>>>Phone
button.
Any problems you find with this program post at 10's SEEM Changer Thread and I will take a
look.
Home.